definición y significado de Multi-frequency | sensagent.com


   Publicitad E▼


 » 
alemán árabe búlgaro checo chino coreano croata danés eslovaco esloveno español estonio farsi finlandés francés griego hebreo hindù húngaro indonesio inglés islandés italiano japonés letón lituano malgache neerlandés noruego polaco portugués rumano ruso serbio sueco tailandès turco vietnamita
alemán árabe búlgaro checo chino coreano croata danés eslovaco esloveno español estonio farsi finlandés francés griego hebreo hindù húngaro indonesio inglés islandés italiano japonés letón lituano malgache neerlandés noruego polaco portugués rumano ruso serbio sueco tailandès turco vietnamita

Definición y significado de Multi-frequency

Definición

definición de Multi-frequency (Wikipedia)

   Publicidad ▼

Wikipedia

Multi-frequency

From Wikipedia, the free encyclopedia

Jump to: navigation, search

In telephony multi-frequency (MF) is an outdated, in-band signaling technique. Numbers were represented in a two-out-of-five code for transmission from a multi-frequency sender, to be received by a multi-frequency receiver in a distant telephone exchange. MF was used for trunk signaling, and is a precursor of modern DTMF "TouchTones" now used for subscriber signaling.

Using MF signaling, the originating telephone switching office would send a starting signal such as a seizure (off-hook) by toggling the AB bits. After the initial seizure, the terminating office acknowledges a ready state by responding with a wink (short duration seizure) and then goes back on-hook (wink start). The originating office would send the destination digits to the terminating switch. What makes MF and in-band signaling different than SS7 is that the routing digits are out-pulsed in MF format in the same 64 kilobit channel used by the voice audio connection. The user dialing cannot detect these digits being out-pulsed because the audio connection is not established all the way to the user’s handset or device until after the connection is established with the terminating switch. Following a full connection, the same audio channel is connected to the user in order to communicate the voice, modem or fax data across that same 64kb channel previously used for the in-band MF signaling.

Out-of-band Common Channel Signaling is nearly universal today in the United States. Benefits include higher connection establishment rate, more fraud security (antiphreaking measures), and features such as Caller I.D.; however, some 911 PSAPs (Public Safety Answering Points) still use the MF format to process calls from MTSOs (Mobile Telephone Switching Offices) and land telephone offices. Other countries may still use a version of in-band signaling.

MF signaling includes R2 signalling, R1[1] (in North America), and Signaling System No. 5.

For details on R1, see blue box.

References

  1. ^ ITU-T Recommendation Q.310-Q.332 - Specification of Signalling System R1


 

todas las traducciones de Multi-frequency


Contenido de sensagent

  • definiciones
  • sinónimos
  • antónimos
  • enciclopedia

 

4591 visitantes en línea

computado en 0,016s